No. QLQZD-003

Name: QLQZD-003 PLC Microcomputer Control Automatic Bearing Marking Assembly Line

Specification:

Index:

Product Category: auto marking machine

 

Technical Parameters

This product applies for the marking on the end face (flat face) of sphere bearing. It defers from the conventional marking. It can mark without any discontinuous lines and it can mark complicated brand patterns. It can mark on the sphere bearings from Φ40mm to Φ110mm even if the bearings path designs are very flexible. It is easy to change the templates and positions due to a tuning system provided for special templates. The system has higher automation level, including the auto bearing feeding, auto lining-up, auto marking, auto liquid supply, auto counting and auto receiving. It is also provided with the design such as the marking liquid (electrolytic liquid) lack alarm,  bearing feeding lack alarm, template life counting, feeder auto stop with receiver full alarm.

1.     Kinko CPU306 24-dot 16-bit PLC, highly integrated, less faults, high marking accuracy, marking time control by microsecond

2.     Eview MT506T,  256 colors, 5.7STN touch screen for good display and easy operation

3.     With a high-accuracy stabilizer;

4.     With a main control board (only one circuit board) for rapid restart after fault elimination.  

5.     Over current protection for marking (alarm more than 16A) to minimize the faults of main control board for marking;

6.     Over voltage protection for marking (alarm more than 15V) to prevent the template from burning due to over voltage;

7.     Marking conduction testing technology. The marking has to start only after conduction, i.e. it would not start before conduction ( Normally the marking time is counted from the moment of marking cylinder gonging down. However the used marking time is much less than the actual marking time); 

8.     Marking head humidity testing technology. Ensure the marking liquid to be supplied properly, without over supply or a lack.

9.     Fully automatic and intelligent supply of marking liquid without manual interfere;

10.    Automatic supply time of marking liquid can be set up every time at will;

11.    Automatic alarm if the storage vessel has a lack of marking liquid;

12.    Marking frequency counting for the comparison with of manual counting;

13.    Template printing frequency counting for the reference of template change;

14.    Marketing liquid supply counting for the reference of storage vessel consumption;

15.    One-key recovery of ex-factory parameters;

16.    On-key storage of user parameters;

17.    One-key recovery of user parameters;

18.    Fully automatic feeding;

19.    Fully automatic receiving;

20.    Receiver is controlled directly by the main PLC to improve the operation integration;

21.    Complete alarm messages for the understanding of equipment performance: over voltage alarm, over current alarm, marking liquid lack alarm, leaving-out alarm, marketing head liquid saturation (lack) alarm and indication;

22.  Automatic control of bearing position without manual adjustment;

23.  Wider range of marking bearing;

24.  Automatic stop of the production line when the collection box is full; 

25.  Double-power output for (1) the smooth large power output and (2) the reduction of power part burden and (3) the easy maintenance of power parts;

26.  Start protection circuit for marking interface card to avoid the high pulse into the circuit system of the marking machine when it starts;

27.  Filter circuit is built in the marking interface card for filtering the peak voltage more than 220V AC;

28.  Counting and alarming for leaving-out marks;

29.  Unique template clamp and bearing clamp for the quick template change and quick bearing positioning;

30.  With a high-accuracy 500W stabilizer;

31.  With a marking interface card for easy maintenance;