1. Flexible and easy for marking on products, the output power is 320W;

2. Higher integration of PLC and lower fault rate;

3. 16-bit PLC to realize higher control accuracy in the marking process;

4. Clear and easy operation from the 5.7”touch screen；

5. Over-current protection for marking voltage (alarming in case of more than approx. 13A) to prolong the service life of marking power parts;

6. Over-voltage protection for marking voltage (alarming in case of more than approx. 15V) to prevent the stencil plate from burning due to higher voltage;

7. Accurate marking time by milliseconds;

8. Fully automatic and intelligent supply of marking liquid without manual interfere after setting up;

9. Automatic supply time of marking liquid can be set up in the initialization at will;

10.          Alarm in case of a lack of marking liquid in the storage vessel;

11.          Marking counter for the reference of manual marking;

12.          Printing frequency counting of stencil plate for the reference of stencil plate change;

13.Marketing liquid counting for reference of storage vessel consumption;

14.          Double-power output for (1) the smooth large power output and (2) the reduction of power part burden and (3) the easy maintenance of power parts; Double-power output for (1) the smooth large power output and (2) the reduction of power part burden and (3) the easy maintenance of power parts;

15. A start protection circuit for the main board of marking interface to avoid the high pulse into the circuit system of the marking machine when it starts;

16. Filter circuit is built in the main board of marking interface for filtering the peak voltage more than 220V AC;

17. One-key recovery of ex-factory parameters;

18. One-key storage of user parameters;

19.   One-key recovery of user parameters;

20.  Repeated marking selected by 1–5 times (for a large mark, it will increase the marking effect and prolong the service life of stencil plate, carbon felt and conduction net;

21.  Complete alarm messages for the understanding of equipment performance: over voltage alarm, over current alarm, marking liquid lack alarm, leaving-out alarm, marketing head liquid saturation (lack) alarm and indication;

22.  For the products such as bearing, the product will be marked automatically through induction when it is pushed to the marking position by manual;

23.  For the products such as bearing, it will be pushed out after the marking ends to reduce the laboring intensity and increase the productivity (without this function under Model V);

24.  Touch screen with marking experiences, implies and fault messages and diagnosis for the operators’ reading as any time to master the optimum marking methods and reduce the consumptions;

25.  For the products with clamps, the stencil plate and clamp can be quickly changed and the product to be marked can be quickly positioned;

26.  A high-accuracy 500W industrial stabilizer is provided;

 

A marking main board with interface is provided. If the main board goes wrong, you can replace it quickly to make the machine can work normally.